Prof. Dr. İBRAHİM AKINCI

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 30

A decade of design for additive manufacturing research: a bibliometric analysis (2014–2024)

ÇELİK H. K., Elham A., Erbil M. A., Rennie A. E., AKINCI İ.

Rapid Prototyping Journal , 2025 (SCI-Expanded)

Evaluation of stress distribution on an endodontically treated maxillary central tooth with lesion restored with different crown materials: A finite element analysis

Kırmalı Ö., Icen G., Celik H. K., Rennie A. E.

Heliyon , cilt.10, sa.3, 2024 (SCI-Expanded)

Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

ÇELİK H. K., AKINCI İ., ERKAN M., Rennie A. E. W.

Journal of Food Process Engineering , cilt.46, sa.11, 2023 (SCI-Expanded)

Effects of bruising of 'Pink Lady' apple under impact loading in drop test on firmness, colour and gas exchange of fruit during long term storage

Çelik H. K., Ustun H., Erkan M., Rennie A. E. W., Akıncı İ.

POSTHARVEST BIOLOGY AND TECHNOLOGY , cilt.179, 2021 (SCI-Expanded)

Strength-based design analysis of a Para-Plow tillage tool

ÇELİK H. K., ÇAĞLAYAN N., TOPAKCI M., Rennie A. E. W., AKINCI İ.

COMPUTERS AND ELECTRONICS IN AGRICULTURE , cilt.169, 2020 (SCI-Expanded)

Design and Additive Manufacturing of Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19 )

ÇELİK H. K., KOSE O., ULMEANU M., Rennie A. E. W., Abram T. N., AKINCI İ.

INTERNATIONAL JOURNAL OF BIOPRINTING , cilt.6, sa.4, ss.30-50, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Mechanical collision simulation of potato tubers

ÇELİK H. K., ÇINAR R., Yilmaz D., ULMEANU M., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.42, sa.5, 2019 (SCI-Expanded)

Determination of time dependent stress distribution on a potato tuber during drop case

ÇAĞLAYAN N., ORAL O., ÇELİK H. K., ÇINAR R., DE ABREU RODRIGUES L. C., Rennie A. E. W., et al.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.41, sa.7, 2018 (SCI-Expanded)

Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

ÇELİK H. K., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION , cilt.11, sa.1, ss.75-84, 2017 (SCI-Expanded)

Design and structural optimisation of a tractor mounted telescopic boom crane

ÇELİK H. K., Rennie A. E. W., AKINCI İ.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.39, sa.3, ss.909-924, 2017 (SCI-Expanded)

Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips

ÇELİK H. K., LUPEANU M. E., Rennie A. E. W., NEAGU C., AKINCI İ.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.35, sa.3, ss.305-318, 2013 (SCI-Expanded)

SELECTED PROPERTIES OF SESAME AS A FUNCTION OF VARIETIES AND MOISTURE CONTENTS

Yilmaz D., AKINCI İ., ÇAĞIRGAN M. İ.

INTERNATIONAL JOURNAL OF FOOD PROPERTIES , cilt.15, sa.1-2, ss.81-88, 2012 (SCI-Expanded)

Deformation behaviour simulation of an apple under drop case by finite element method

ÇELİK H. K., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD ENGINEERING , cilt.104, sa.2, ss.293-298, 2011 (SCI-Expanded)

Modal analysis of agricultural machineries using finite element method: A case study for a V-belt pulley of a fodder crushing machine

ÇELİK H. K., TOPAKCI M., ÇANAKCI M., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT , cilt.8, sa.3-4, ss.439-446, 2010 (SCI-Expanded)

Deep tillage tool optimization by means of finite element method: Case study for a subsoiler tine

TOPAKCI M., ÇELİK H., ÇANAKCI M., Rennie A. E. W., AKINCI İ., KARAYEL D.

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT , cilt.8, sa.2, ss.531-536, 2010 (SCI-Expanded)

Effect of moisture content and stalk section on some engineering parameters of closed capsule sesame stalks (Sesamum indicum L.)

Yılmaz D., Kabaş Ö., AKINCI İ., Özmerzi A., ÇAĞIRGAN M. İ.

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT , cilt.7, sa.3-4, ss.306-311, 2009 (SCI-Expanded)

Finite element analysis of a failure in rear-mounted mower pulley

YILMAZ D., ÇELİK H. K., AKINCI İ.

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT , cilt.7, sa.3-4, ss.865-868, 2009 (SCI-Expanded)

Strength and Deformation Parameters of Sesame Stalk in Relation to Harvest

Yılmaz D., Kabaş Ö., Akinci I., ÇAĞIRGAN M. İ.

PHILIPPINE AGRICULTURAL SCIENTIST , cilt.92, sa.1, ss.85-91, 2009 (SCI-Expanded)

Drop test simulation of a sample tomato with finite element method

Kabas Ö., Çelik H. K., Ozmerzı A., Akinci İ.

Journal of the Science of Food and Agriculture , cilt.88, sa.9, ss.1537-1541, 2008 (SCI-Expanded)

Some physical and nutritional properties of cowpea seed (Vigna sinensis L.)

Kabas O., Yilmaz E., Ozmerzi A., Akinci İ.

JOURNAL OF FOOD ENGINEERING , cilt.79, sa.4, ss.1405-1409, 2007 (SCI-Expanded) Sürdürülebilir Kalkınma

Some physical, pomological and nutritional properties of two plum (Prunus domestica L.) cultivars

Ertekin C., Gozleki S., KABAS O., Sonmez S., Akinci I.

JOURNAL OF FOOD ENGINEERING , cilt.75, sa.4, ss.508-514, 2006 (SCI-Expanded)

Energy use pattern analyses of greenhouse vegetable production

Canakci A., Akinci I.

ENERGY , cilt.31, sa.8-9, ss.1243-1256, 2006 (SCI-Expanded)

Physical properties of cactus pear (Opuntia ficus india L.) grown wild in Turkey

KABAŞ Ö., Özmerzi A., Akinci I.

JOURNAL OF FOOD ENGINEERING , cilt.73, sa.2, ss.198-202, 2006 (SCI-Expanded)

Some Physical, Pomological and Nutritional Properties of Two Plum Cultivars

ERTEKİN C., GÖZLEKÇİ S., KABAS O., SÖNMEZ S., AKINCI İ.

INTERNATIONAL JOURNAL OF FOOD ENGINEERING , cilt.75, 2006 (SCI-Expanded)

Failure of a rotary tiller spur gear

Akinci İ., Yilmaz D., Canakci M.

ENGINEERING FAILURE ANALYSIS , cilt.12, sa.3, ss.400-404, 2005 (SCI-Expanded)

Energy use pattern of some field crops and vegetable production: Case study for Antalya Region, Turkey

Canakci M., Topakci M., Akinci I., Özmerzi A.

ENERGY CONVERSION AND MANAGEMENT , cilt.46, sa.4, ss.655-666, 2005 (SCI-Expanded) Sürdürülebilir Kalkınma

Physical and nutritional properties of four orange varieties

Topuz A., Topakci M., Canakci M., Akinci I., Ozdemir F.

JOURNAL OF FOOD ENGINEERING , cilt.66, sa.4, ss.519-523, 2005 (SCI-Expanded)

Some physical and nutritional properties of Juniperus drupacea fruits

Akinci I., Ozdemir F., Topuz A., KABAŞ Ö., Canakci M.

JOURNAL OF FOOD ENGINEERING , cilt.65, sa.3, ss.325-331, 2004 (SCI-Expanded)

Physical and nutritional properties of four major commercial Turkish hazelnut varieties

Ozdemir F., Akinci I.

JOURNAL OF FOOD ENGINEERING , cilt.63, sa.3, ss.341-347, 2004 (SCI-Expanded)

The effect of subsoiling on soil resistance and cotton yield

Akinci İ., Cakir E., Topakci M., Canakci M., Inan O.

SOIL & TILLAGE RESEARCH , cilt.77, sa.2, ss.203-210, 2004 (SCI-Expanded) Sürdürülebilir Kalkınma

Diğer Dergilerde Yayınlanan Makaleler 29

Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

Celik H. K., ERSOY H., DOĞAN A., Eravci G., Rennie A. E. W., AKINCI İ.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.21, sa.4, ss.1315-1322, 2021 (ESCI)

Katmanlı İmalat Teknolojileri Konusunda YapılanUluslararası Bilimsel Yayınlar için Güncel Durum İncelemesi

ÇELİK H. K., Kunt G., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.16, sa.3, ss.39-51, 2020 (Hakemli Dergi)

A Potential Research Area Under Shadow In Engineering: Agricultural Machinery Design and Manufacturing

ÇELİK H. K., Rennie A. E., AKINCI İ.

ISPEC Journal of Agricultural Sciences , cilt.4, sa.2, ss.66-86, 2020 (Hakemli Dergi)

Finite Element Analysis of a PTO Shaft Used in an Agricultural Tractor

ÇELİK H. K., ÇINAR R., KUNT G., RENNIE A. E., UÇAR M., AKINCI İ.

Ergonomics International Journal , cilt.2, sa.3, ss.147, 2018 (Hakemli Dergi)

Antalya ili tarım işletmelerinin tarımsal yapı, üretim ve mekanizasyon özelliklerinin belirlenmesi

COMART A., AKINCI İ.

Mediterranian Agricultural Sciences , cilt.30, sa.4, ss.227-234, 2017 (Hakemli Dergi)

Non-linear fem-based shattering simulation of shelled edible agricultural products: Walnut shattering by nut cracker hand tool

Çelik H. K., Kunt G., Rennie A. E., Akıncı İ.

International Journal of Technology and Engineering Studies , cilt.3, sa.2, ss.84-92, 2017 (Hakemli Dergi)

Çarpma Etkisi Altında Kalan Armut Meyvelerinin Ankara çeşidi Zedelenme Hacminin Doğrusal OlmayanDinamik Sonlu Elemanlar Analizi ile Belirlenmesi

ÇELİK H. K., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.12, sa.1, ss.1-10, 2016 (Hakemli Dergi)

Analytical and Finite Element Method Based Stress Analysis of Rotary Elements: Case Study for the Motion Transmission Gears of a Rotary Drum Mower

ÇELİK H. K., AKINCI İ.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.16, sa.2, ss.293-301, 2016 (ESCI)

Tamburlu Çayır Biçme Makinesi Hareket İletim Millerinin Analitik ve Sonlu Elemanlar Yöntemi İle Gerilme Analizi

ÇELİK H. K., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.1, ss.247-255, 2015 (Hakemli Dergi)

Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

ÇELİK H. K., KARAYEL D., Lupeanu M., Rennie A., AKINCI İ.

Bulgarian Journal of Agricultural Science , cilt.21, sa.3, ss.703-710, 2015 (Scopus)

Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In Line Drip Emitter

ÇELİK H. K., KARAYEL D., ÇAĞLAYAN N., Rennie A., AKINCI İ.

VIRTUAL AND PHYSICAL PROTOTYPING , sa.6, ss.47-56, 2011 (Scopus)

Determination of Flow Parameters through CFD Analysis for Agricultural Irrigation Equipment: A Case Study for a Mini Valve

ÇELİK H. K., Rennie A. E. W., KARAYEL D., AKINCI İ.

Journal of Agricultural Machinery Science , cilt.7, sa.3, ss.231-239, 2011 (Hakemli Dergi)

Industry of pressurized irrigation system components and its characteristics in West Mediterranean Region

ÇANAKCI M., AYTEM H., KARAYEL D., TOPAKCI M., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.6(3), ss.153-161, 2010 (Hakemli Dergi)

Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for A Sample In-Line Drip Emitter

ÇELİK H. K., KARAYEL D., ÇAĞLAYAN N., AKINCI İ., Rennie A. E. W.

Virtual and Physical Prototyping, Vol. 6 (1): 147-156 , cilt.6, sa.1, ss.147-156, 2010 (Hakemli Dergi) Sürdürülebilir Kalkınma

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 68

A potential research area under shadow in engineering:Agricultural machinery design and manufacturing

Çelik H. K., Rennıe A. E., Akıncı İ.

2nd International Conference on Materials Science and Materials Chemistry, London, İngiltere, 20 - 21 Mart 2019, cilt.3, sa.1, ss.22, (Tam Metin Bildiri)

Sabit Mesnetli Basit Bir Kiriş Elemanda, Tek Eksenli Yükleme Koşulunda Ortaya Çıkan Gerilme Değerlerinin Analitik, Deneysel ve Sayısal Yöntemler ile Belirlenmesi

Çelik H. K., Akıncı İ.

29. Ulusal Tarımsal Mekanizasyon ve Enerji Kongresi (TARMEK-2015), Diyarbakır, Türkiye, 2 - 09 Eylül 2015, cilt.1, ss.1, (Tam Metin Bildiri)

Power and energy requirements for agricultural machinery used driven by tractor on greenhouse vegetable production in Turkey

Çanakcı M., Akıncı İ.

XVIIth World Congress of CIGR, Quebec, Kanada, 13 - 17 Haziran 2010, ss.1, (Tam Metin Bildiri)

Use of electronic devices in combine harvesters: a case study for antalya region in Turkey

Akıncı İ., Yılmaz D., Çanakcı M.

XVIIth World Congress of CIGR, Quebec, Kanada, 13 - 17 Haziran 2010, ss.1, (Tam Metin Bildiri)

Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Acase study for a sample in-line drip emitter

Çelik H. K., Karayel D., Çağlayan N., Rennie A., Akıncı İ.

11th National Conference on Rapid Design, Prototyping and Manufacturing, Lancaster University, Lancaster Product Development Unit, Engineering Department, Lancaster, İngiltere, 11 Haziran 2010, ss.181-192, (Tam Metin Bildiri)

A research on determination of optimum mechanisation implements for farms which grows wheat, cotton and corn in Antalya region

Çanakcı M., Akıncı İ.

7th International Congress on Agricultural Mechanisation and Energy ICAME-Adana'99, Adana, Türkiye, 26 - 27 Mayıs 1999, ss.514-520, (Tam Metin Bildiri)

Determination of the basic data and minimum power for the tractor selection in the Southeastern Anatolia Project (GAP) area

Sabancı A., Işık A., Akıncı İ., Godwın R. J., Blockmore S.

5th International Congress on Mechanization and Energy in Agriculture, İzmir, Türkiye, 1 - 04 Kasım 1993, ss.32-42, (Tam Metin Bildiri)

Kitaplar 2

Birimler, Simgeler ve Boyutsuz Sayılar

AKINCI İ., ERTEKİN C., COMART A., AKBOLAT D., AKTAŞ T., ALİBAŞ K., et al.

Tarım Makinaları Çözümlü Problemleri, COMART Adem, ERTEKİN Can, Editör, Nobel, Ankara, ss.1-446, 2022

Üniversiter yapılaşma ve tarım mühendisliği öğretim programları

AKINCI İ., SABANCI A.

Çukurova Üniversitesi Ziraat Fakültesi Dekanlığı, Adana, 1996

Diğer Yayınlar 3

Metrikler

Yayın

140

Atıf (WoS)

1064

H-İndeks (WoS)

Atıf (Scopus)

1527

H-İndeks (Scopus)

Atıf (Scholar)

1024

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Tez Danışmanlığı

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Atıf (TrDizin)

H-İndeks (TrDizin)

Atıf (Diğer Toplam)

Proje

Tez Danışmanlığı

Açık Erişim