Prof. Dr. HÜSEYİN KÜRŞAT ÇELİK

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Improved Durability of a Modular Axial Fixator for Stable and Unstable Proximal Femoral Fractures: A Patient-Specific Finite Element Analysis

ÇELİK H. K., İÇEN M., ÖZDEMİR H., Rennıe A. E.

Journal of Medical Devices, Transactions of the ASME , cilt.18, sa.1, 2024 (SCI-Expanded)

Structural strength analysis of a rotary drum mower during harvesting

Çelik H. K., Akıncı İ., Çağlayan N., Rennie A. E.

JOURNAL OF AGRICULTURAL ENGINEERING (Pavia) , cilt.55, sa.1, ss.136-148, 2024 (SCI-Expanded)

Evaluation of stress distribution on an endodontically treated maxillary central tooth with lesion restored with different crown materials: A finite element analysis

Kırmalı Ö., Icen G., Celik H. K., Rennie A. E.

Heliyon , cilt.10, sa.3, 2024 (SCI-Expanded)

Comparison of four different screw configurations for the fixation of Fulkerson osteotomy: a finite element analysis

Aykanat F., Kose O., Guneri B., ÇELİK H. K., Cakar A., Tasatan E., et al.

Journal of Orthopaedics and Traumatology , cilt.24, sa.1, 2023 (SCI-Expanded)

Determining the instantaneous bruising pattern in a sample potato tuber subjected to pendulum bob impact through finite element analysis

ÇELİK H. K., AKINCI İ., ERKAN M., Rennie A. E. W.

Journal of Food Process Engineering , cilt.46, sa.11, 2023 (SCI-Expanded)

Structural Strength Analysis of a Rotary Drum Mower in Transportation Position

Celik H. K., Akinci I., Caglayan N., Rennie A. E. W.

APPLIED SCIENCES , cilt.13, sa.20, ss.1-18, 2023 (SCI-Expanded)

A Numerical Method-Based Analysis of the Structural Deformation Behaviour of a Turkish String Instrument (Cura Baglama) under Varying String Tensions

Celik H. K., Gok S., Caglayan N., Rennie A. E. W.

Applied Sciences (Switzerland) , cilt.13, sa.17, 2023 (SCI-Expanded)

The state of additive manufacturing in dental research-A systematic scoping review of 2012-2022

Celik H. K., Koc S., Kustarci A., Caglayan N., Rennie A. E.

HELIYON , cilt.9, sa.6, 2023 (SCI-Expanded)

How to fix a tibial tubercle osteotomy with distalisation: A finite element analysis

Guneri B., Kose O., ÇELİK H. K., Cakar A., Tasatan E., Rennie A. E.

Knee , cilt.37, ss.132-142, 2022 (SCI-Expanded)

Effect of coronal fracture angle on the stability of screw fixation in medial malleolar fractures: A finite element analysis

Emre T. Y., ÇELİK H. K., Arik H. O., Rennie A. E. W., Kose O.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE , cilt.236, sa.6, ss.825-840, 2022 (SCI-Expanded)

A literature review on the linear elastic material properties assigned in finite element analyses in dental research

Celik H. K., KOÇ S., KUŞTARCI A., Rennie A. E. W.

MATERIALS TODAY COMMUNICATIONS , cilt.30, 2022 (SCI-Expanded)

Comparison of Fixation Techniques in Oblique and Biplanar Chevron Medial Malleolar Osteotomies; a Finite Element Analysis

Levent A., Yapti M., ÇELİK H. K., Kose O., Kilicaslan O. F., Rennie A. E.

Journal of Foot and Ankle Surgery , cilt.61, sa.2, ss.253-258, 2022 (SCI-Expanded)

Effects of bruising of 'Pink Lady' apple under impact loading in drop test on firmness, colour and gas exchange of fruit during long term storage

Çelik H. K., Ustun H., Erkan M., Rennie A. E. W., Akıncı İ.

POSTHARVEST BIOLOGY AND TECHNOLOGY , cilt.179, 2021 (SCI-Expanded)

Effect of cartilage thickness mismatch in osteochondral grafting from knee to talus on articular contact pressures: A finite element analysis

Kilicaslan O. F., Levent A., ÇELİK H. K., Tokgoz M. A., Kose O., Rennie A. E. W.

JOINT DISEASES AND RELATED SURGERY , cilt.32, sa.2, ss.355-362, 2021 (SCI-Expanded)

Strength-based design analysis of a Para-Plow tillage tool

ÇELİK H. K., ÇAĞLAYAN N., TOPAKCI M., Rennie A. E. W., AKINCI İ.

COMPUTERS AND ELECTRONICS IN AGRICULTURE , cilt.169, 2020 (SCI-Expanded)

Design and Additive Manufacturing of Medical Face Shield for Healthcare Workers Battling Coronavirus (COVID-19 )

ÇELİK H. K., KOSE O., ULMEANU M., Rennie A. E. W., Abram T. N., AKINCI İ.

INTERNATIONAL JOURNAL OF BIOPRINTING , cilt.6, sa.4, ss.30-50, 2020 (SCI-Expanded) Sürdürülebilir Kalkınma

Mechanical collision simulation of potato tubers

ÇELİK H. K., ÇINAR R., Yilmaz D., ULMEANU M., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.42, sa.5, 2019 (SCI-Expanded)

Determination of time dependent stress distribution on a potato tuber during drop case

ÇAĞLAYAN N., ORAL O., ÇELİK H. K., ÇINAR R., DE ABREU RODRIGUES L. C., Rennie A. E. W., et al.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.41, sa.7, 2018 (SCI-Expanded)

Explicit dynamics simulation of Pecan fruit deformation under compressive loadingPart-2: Explicit dynamics simulation procedure

ÇELİK H. K.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.40, sa.6, 2017 (SCI-Expanded)

Explicit dynamics simulation of Pecan fruit deformation under compressive loadingPart-1: Determination of modulus of elasticity

ÇELİK H. K.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.40, sa.6, 2017 (SCI-Expanded)

Nonlinear FEM based high-speed shell shattering simulation for shelled edible agricultural products: Pecan fruit shattering

ÇELİK H. K., ÇAĞLAYAN N., Rennie A. E. W.

JOURNAL OF FOOD PROCESS ENGINEERING , cilt.40, sa.5, 2017 (SCI-Expanded)

Determination of bruise susceptibility of pears (Ankara variety) to impact load by means of FEM-based explicit dynamics simulation

ÇELİK H. K.

POSTHARVEST BIOLOGY AND TECHNOLOGY , cilt.128, ss.83-97, 2017 (SCI-Expanded)

Reverse engineering approach for precise measurement of the physical attributes related to the geometric features of agricultural products

ÇELİK H. K., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD MEASUREMENT AND CHARACTERIZATION , cilt.11, sa.1, ss.75-84, 2017 (SCI-Expanded)

Design and structural optimisation of a tractor mounted telescopic boom crane

ÇELİK H. K., Rennie A. E. W., AKINCI İ.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.39, sa.3, ss.909-924, 2017 (SCI-Expanded)

Pressure Determination Approach in Specific Pressure Regions and FEM-Based Stress Analysis of the Housing of an External Gear Pump

Cinar R., Ucar M., ÇELİK H. K., Firat M. Z., Rennie A. E. W.

EXPERIMENTAL TECHNIQUES , cilt.40, sa.2, ss.489-499, 2016 (SCI-Expanded)

Product re-design using advanced engineering applications and function analysis: a case study for greenhouse clips

ÇELİK H. K., LUPEANU M. E., Rennie A. E. W., NEAGU C., AKINCI İ.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.35, sa.3, ss.305-318, 2013 (SCI-Expanded)

Deformation behaviour simulation of an apple under drop case by finite element method

ÇELİK H. K., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD ENGINEERING , cilt.104, sa.2, ss.293-298, 2011 (SCI-Expanded)

Design of a Horizontal Penetrometer for Measuring On-the-Go Soil Resistance

TOPAKCI M., Unal I., ÇANAKCI M., ÇELİK H. K., KARAYEL D.

SENSORS , cilt.10, sa.10, ss.9337-9348, 2010 (SCI-Expanded)

Modal analysis of agricultural machineries using finite element method: A case study for a V-belt pulley of a fodder crushing machine

ÇELİK H. K., TOPAKCI M., ÇANAKCI M., Rennie A. E. W., AKINCI İ.

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT , cilt.8, sa.3-4, ss.439-446, 2010 (SCI-Expanded)

Finite element analysis of a failure in rear-mounted mower pulley

YILMAZ D., ÇELİK H. K., AKINCI İ.

JOURNAL OF FOOD AGRICULTURE & ENVIRONMENT , cilt.7, sa.3-4, ss.865-868, 2009 (SCI-Expanded)

Drop test simulation of a sample tomato with finite element method

Kabas Ö., Çelik H. K., Ozmerzı A., Akinci İ.

Journal of the Science of Food and Agriculture , cilt.88, sa.9, ss.1537-1541, 2008 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

Finite Element Stress Analysis of PEEK, Glass Fiber and Zirconia Post-Core Sys-tems in Maxillary Central Incisor

ÖZARSLAN M., BÜYÜKKAPLAN U. Ş., ÖZARSLAN M. M., TÜRKER N., ÇELİK H. K.

VAN SAĞLIK BİLİMLERİ DERGİSİ , cilt.14, sa.2, ss.180-190, 2021 (Hakemli Dergi)

Strength-Based Design Analysis of a Damaged Engine Mounting Bracket Designed for a Commercial Electric Vehicle

Celik H. K., ERSOY H., DOĞAN A., Eravci G., Rennie A. E. W., AKINCI İ.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.21, sa.4, ss.1315-1322, 2021 (ESCI)

CFD Simulation of Air Flow Behaviour atDifferent Flow Rates in a Turkish WoodwindInstrument (Turkish Treble Recorder)

Çelik H. K., Bedel A., Gök S., Rennıe A. E. W.

Open Journal of Acoustics , cilt.11, ss.1-16, 2021 (Hakemli Dergi)

Katmanlı İmalat Teknolojileri Konusunda YapılanUluslararası Bilimsel Yayınlar için Güncel Durum İncelemesi

ÇELİK H. K., Kunt G., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.16, sa.3, ss.39-51, 2020 (Hakemli Dergi)

Özel Tasarım Bir Gübre Sıyırıcı Küreğinin Yapısal ve İşlevsel Elemanlarında Sonlu Elemanlar Yöntemi ile Gerilme Analizi

BOYAR İ., ÇELİK H. K., YILMAZ D.

ÇOMÜ Ziraat Fakültesi Dergisi , cilt.8, sa.1, ss.137-143, 2020 (Hakemli Dergi)

A Potential Research Area Under Shadow In Engineering: Agricultural Machinery Design and Manufacturing

ÇELİK H. K., Rennie A. E., AKINCI İ.

ISPEC Journal of Agricultural Sciences , cilt.4, sa.2, ss.66-86, 2020 (Hakemli Dergi)

Özel Tasarım Bir Bilyeli Değirmen Makinesine Ait Boyun Yataklarının Gerilme Analizi

Çelik H. K., Çetinkaya Ç., Ak F., Özmen O.

Kocaeli Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.3, sa.1, ss.31-36, 2020 (Hakemli Dergi)

Determination of the Failure Susceptibility of a Flat Die Used in Biomass Pelletizing Machines by Means of FEA-Based Design Exploration

ÇELİK H. K., YILMAZ H., Rennie A. E. W., ÇINAR R., FIRAT M. Z.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.18, sa.5, ss.1099-1110, 2018 (ESCI)

A SHORT REVIEW ON 4D PRINTING (4B YAZDIRMA (4D PRINTING) ÜZERİNDE BİR KISA İNCELEME)

KHAN F. A., ÇELİK H. K., ORAL O., RENNIE A. W.

International Journal of 3D Printing Technologies and Digital Industry , cilt.2, sa.2, ss.59-67, 2018 (Hakemli Dergi)

Finite Element Analysis of a PTO Shaft Used in an Agricultural Tractor

ÇELİK H. K., ÇINAR R., KUNT G., RENNIE A. E., UÇAR M., AKINCI İ.

Ergonomics International Journal , cilt.2, sa.3, ss.147, 2018 (Hakemli Dergi)

Fuzzy Logic Based Ventilation for Controlling Harmful Gases in Livestock Houses

ÇAĞLAYAN N., ÇELİK H. K., RENNIE A. W.

Tarım Makinaları Bilimi Dergisi , cilt.13, sa.2, ss.107-112, 2017 (Hakemli Dergi)

Non-linear fem-based shattering simulation of shelled edible agricultural products: Walnut shattering by nut cracker hand tool

Çelik H. K., Kunt G., Rennie A. E., Akıncı İ.

International Journal of Technology and Engineering Studies , cilt.3, sa.2, ss.84-92, 2017 (Hakemli Dergi)

Çarpma Etkisi Altında Kalan Armut Meyvelerinin (Ankara çeşidi) Zedelenme Hacminin Doğrusal Olmayan Dinamik Sonlu Elemanlar Analizi ile Belirlenmesi (Determination of Bruise Volume of Pear Fruit (Ankara Variety) under Mechanical Collision Effect by means of Non Linear Dynamics Finite Element Analysis)

ÇELİK H. K., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.12, sa.1, ss.1-10, 2016 (Hakemli Dergi)

Pikan Meyvesi Çekirdeklerinin Doğrusal Olmayan Sonlu Elemanlar Yöntemi Temelli Simülasyonu (Non linear FEM Based Compression Simulation of Pecan Fruit Kernels)

ÇELİK H. K.

Akademik Gıda (Academic Food) , cilt.14, sa.1, ss.1-7, 2016 (Hakemli Dergi)

Analytical and Finite Element Method Based Stress Analysis of Rotary Elements: Case Study for the Motion Transmission Gears of a Rotary Drum Mower

ÇELİK H. K., AKINCI İ.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.16, sa.2, ss.293-301, 2016 (ESCI)

Tamburlu Çayır Biçme Makinesi Hareket İletim Millerinin Analitik ve Sonlu Elemanlar Yöntemi ile Gerilme Analizi (Analytical and Finite Element Method Based Stress Analysis of the Motion Transmission Axels of A Rotary Drum Mowe)

ÇELİK H. K., AKINCI İ.

Tarım Makinaları Bilimi Dergisi , cilt.11, sa.3, ss.247-255, 2015 (Hakemli Dergi)

Determination of head losses in drip irrigation laterals with cylindrical in-line type emitters through CFD analysis

ÇELİK H. K., KARAYEL D., Lupeanu M., Rennie A., AKINCI İ.

Bulgarian Journal of Agricultural Science , cilt.21, sa.3, ss.703-710, 2015 (Scopus)

Rapid Prototyping and Flow Simulation Applications in Design of Agricultural Irrigation Equipment: Case Study for a Sample In Line Drip Emitter

ÇELİK H. K., KARAYEL D., ÇAĞLAYAN N., Rennie A., AKINCI İ.

VIRTUAL AND PHYSICAL PROTOTYPING , sa.6, ss.47-56, 2011 (Scopus)

Determination of Flow Parameters through CFD Analysis for Agricultural Irrigation Equipment: A Case Study for a Mini Valve

ÇELİK H. K., Rennie A. E. W., KARAYEL D., AKINCI İ.

Journal of Agricultural Machinery Science , cilt.7, sa.3, ss.231-239, 2011 (Hakemli Dergi)

Structural optimization of a subsoiler

Topakcı M., Çelik H. K., Çanakcı M., Karayel D., Rennie A.

PAKISTAN JOURNAL OF AGRICULTURAL SCIENCES , cilt.53, sa.5, ss.281-287, 2010 (Hakemli Dergi)

Failure analysis of a location axle in tracked tractor

ÇELİK H. K., YILMAZ D., ÜNAL N., AKINCI İ.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.9(3), ss.282-287, 2009 (Scopus)

Stress Analysis on Transmission Gears of a Rotary Tiller using Finite Element Method

TOPAKCI M., ÇELİK H. K., YILMAZ D., AKINCI İ.

Akdeniz Üniversity Journal of the Faculty of Agriculture , cilt.21, sa.2, ss.155-160, 2008 (Hakemli Dergi)

Çizelin Yapısal ve İşlevsel Elemanlarında Sonlu Elemanlar Yöntemi ile Mukavemet Analizi

ÇELİK H. K., TOPAKCI M., YILMAZ D., AKINCI İ.

TARIM MAKİNALARI BİLİMİ DERGİSİ , cilt.3, sa.2, ss.111-116, 2007 (Hakemli Dergi)

Hidrolik Boom Tipi Örnek Bir Krende Statik Yükleme Sonucu Oluşan Gerilmelerin Sonlu Elemanlar Yöntemi ile incelenmesi

ÇELİK H. K., UÇAR M., ÇAVDAR A.

Makine Teknolojileri Elektronik Dergisi (MTED) , cilt.4, sa.4, ss.23-30, 2007 (Hakemli Dergi) Sürdürülebilir Kalkınma

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Özel Tasarım Bir Gübre Sıyırıcı Küreğinin Yapısal ve İşlevsel Elemanlarında Sonlu Elemanlar Yöntemi ile Gerilme Analizi

BOYAR İ., ÇELİK H. K., YILMAZ D.

32. Ulusal Tarımsal Mekanizasyon ve Enerji Kongresi, Çanakkale, Türkiye, 4 - 06 Eylül 2019, cilt.1, sa.1, ss.113 Sürdürülebilir Kalkınma

A potential research area under shadow in engineering:Agricultural machinery design and manufacturing

Çelik H. K., Rennıe A. E., Akıncı İ.

2nd International Conference on Materials Science and Materials Chemistry, London, İngiltere, 20 - 21 Mart 2019, cilt.3, sa.1, ss.22

Product Development for Additive Manufacturing in Biomedical Applications

ULMEANU M., DOICIN C., PINTRIJAL I., BARBARII N., ÇELİK H. K.

1st International Conference on Emerging Technologies in Materials Engineering EmergeMAT and 4th International Workshop on Materials under Extreme Conditions SUPERMAT, Bucharest, Romanya, 14 - 16 Kasım 2018, cilt.1, sa.1, ss.29

SEEDING PERFORMANCE COMPARISON OF THREE DIFFERENT PROTOTYPES OF A SEED SINGULATOR USED IN A PRECISION VACUUM SEEDER

ÖZDEMİR E., KUNT G., YILMAZ H., KARAYEL D., TOPAKCI M., ÇELİK H. K., et al.

19. World Congress of Cigr, Antalya, Türkiye, 22 - 25 Nisan 2018, ss.279 Sürdürülebilir Kalkınma

A Short Review on 4d Printing

KHAN F. A., ÇELİK H. K., ORAL O., RENNIE A. E.

The third International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry (3D-PTC2018), Antalya, Türkiye, 19 - 21 Nisan 2018, ss.1-8

Sabit Mesnetli Basit Bir Kiriş Elemanda, Tek Eksenli Yükleme Koşulunda Ortaya Çıkan Gerilme Değerlerinin Analitik, Deneysel ve Sayısal Yöntemler ile Belirlenmesi

Çelik H. K., Akıncı İ.

29. Ulusal Tarımsal Mekanizasyon ve Enerji Kongresi (TARMEK-2015), Diyarbakır, Türkiye, 2 - 09 Eylül 2015, cilt.1, ss.1

Deformation Simulation of a Tyre Safety Cage in Testing of Agricultural Vehicle Tyres

Çelik H. K., Rennie A. E. W., Dowson D., Eatough A., Eatough J., Akıncı İ.

International Scientific XXXVI CIOSTA & CIGR Section V Conference 2015, Sankt-Peterburg, Rusya, 26 - 28 Mayıs 2015, cilt.1, ss.172-183

PREDICTING LIMIT DRAFT FORCE FOR A CHISEL TINE USING FEA BASED SIMULATION

Çelik H. K., Rennie A. E. W., Akıncı İ.

5th International Conference on Trends in Agricultural Engineering, Prague, Çek Cumhuriyeti, 3 - 06 Eylül 2013, ss.112-117

Tarım Makineleri Tasarımı ve Geliştirilmesinde Bilgisayar Destekli Tasarım ve Mühendislik Uygulamaları

Çelik H. K., Akıncı İ.

27. Tarımsal Mekanizasyon Ulusal Kongresi (TARMEK-2012), Samsun, Türkiye, 5 - 07 Eylül 2012, cilt.1, ss.432-440

Non-Linear Stress Analysis for the Bolt Connections of Chisel Tine using Finite Element Method

Çelik H. K., Rennie A., Akıncı İ.

International Conference of Agricultural Engineering (CIGR-AgEng 2012), Valencia, İspanya, 8 - 12 Temmuz 2012, ss.8

Stress Analysis of a Sample Marine Crane’s Boom under Static Loading Condition.

ÇELİK H. K., ÇAĞLAYAN N., ÇINAR R., ERSOY H., UÇAR M., Rennie A.

5th International Mechanical Engineering Forum 2012, Prag, Çek Cumhuriyeti, 20 - 22 Haziran 2012, ss.246-256

Design for Manufacture using Functional Analysis and CAD Mould Simulation for Rapid Prototyping and Rapid Tooling

Lupeanu M. E., Brooks N. H., Rennie A., Çelik H. K., Neagu C., Akıncı İ.

ASME 2012 11th Biennial Conference on Engineering Systems Design and Analysis, Advanced Manufacturing Processes, Nantes, Fransa, 2 - 04 Temmuz 2011, cilt.1, ss.63-70

Sizing Optimisation of A Subsoiler Framework Using Advanced Engineering Tools

Çelik H. K., Rennie A., Topakcı M., Akıncı İ.

CIOSTA Conference 2011, Vienna, Avusturya, 29 Haziran - 01 Temmuz 2011, ss.1

Product Optimisation by Rapid Manufacturing and Targeted Functional Analysis: A Case Study for A Pump Impeller

LUPEANU M. E., Rennie A. E. W., NEAGU C., ÇELİK H. K.

16th European Forum on Rapid Prototyping and Manufacturing (AEPR’11), Paris, Fransa, 21 - 23 Haziran 2011, cilt.1, ss.14

Deformation Simulation of Additive Manufacturing FDM Parts: A Case Study for Greenhouse Clips

Çelik H. K., Hambalı R., Rennie A., Akıncı İ.

", 12th Rapid Design, Prototyping & Manufacturing Conference (RDPM 2011), Lancaster, İngiltere, 17 Haziran 2011, ss.1

Effect of Build Orientation on FDM Parts: A Case Study for Validation of Deformation Behaviour by FEA)

HAMBALI R. H., ÇELİK H. K., SMITH P., Rennie A. E. W., UÇAR M.

International Conference on Design and Concurrent Engineering-(IDECON 2010, Melaka, Malezya, 20 - 21 Eylül 2010, cilt.1, ss.224-228

Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Acase study for a sample in-line drip emitter

ÇELİK H. K., KARAYEL D., ÇAĞLAYAN N., Rennie A., AKINCI İ.

11th National Conference on Rapid Design, Prototyping and Manufacturing, Lancaster University, Lancaster Product Development Unit, Engineering Department, Lancaster, Birleşik Krallık, 11 Haziran 2010, ss.181-192

Rapid prototyping and flow simulation applications in design of agricultural irrigation equipment: Acase study for a sample in-line drip emitter

ÇELİK H. K., KARAYEL D., ÇAĞLAYAN N., Rennie A., AKINCI İ.

Effect of Thermal and Mechanical Deformation of Metamaterial FDM Components

ÇELİK H. K., TAN Y. S., SEVIOUR R., Rennie A. E. W.

US-TURKEY Workshop on Rapid Technologies, İstanbul, Türkiye, 24 Eylül 2009, cilt.1, ss.83-88

FATIGUE ANALYSIS OF THE MOUNTED TRANSPORT BOX BASED ON FINITE ELEMENT METHOD

Yılmaz D., Çelik H. K., Topakcı M., Akıncı İ.

37th International Symposium of Agricultural Engineering, Opatija, Hırvatistan, 10 - 13 Şubat 2009, cilt.37, ss.465-473

STRUCTURAL OPTIMIZATION WITH FEM IN AGRICULTURAL ENGINEERING: A CASE STUDY FOR IRRIGATION PLUMBING ELEMENT

Çelik H. K., Topakcı M., Akıncı İ.

37th International Symposium of Agricultural Engineering, Opatija, Hırvatistan, 10 - 13 Şubat 2009, cilt.37, ss.497-506

Deformation Behavior Simulation of a Sample Apple under the Impact Effect with Finite Elements Method

Çelik H. K., Kabas O., Topakcı M., Ozmerzı A., Akıncı İ.

10th International Congress on Mechanization and Energy in Agriculture, Antalya, Türkiye, 14 - 17 Ekim 2008, cilt.1, ss.893-897

Deformation behaviour simulation of a sample apple under the impact effect with finite elements method

ÇELİK H. K., KABAŞ Ö., TOPAKCI M., Özmerzi A., AKINCI İ.

10th International Congress on Mechanization and Energy in Agriculture, Akdeniz University, Faculty of Agriculture, Department of Agricultural Machinery, Antalya, Türkiye, 14 - 17 Ekim 2008, ss.893-897

2008, Evaluation of Turkey’s Tractor Population In Terms of Economic Life

AKINCI İ., ÇANAKCI M., YILMAZ D., ÇELİK H. K.

10th International Congress on Mechanization and Energy in Agriculture, Antalya, Türkiye, 14 - 17 Ekim 2008, cilt.1, ss.77-83

tructural stress analysis under the static load of a tractor mounted lifting apparatus

ÇELİK H. K., YILMAZ D., AKINCI İ.

CIGR-International Conference of Agricultural Engineering, CD version, Iguassu Falls City, Brezilya, 31 Ağustos - 04 Eylül 2008, ss.1

Structural Stress Analysis under the Static Load of a Tractor Mounted Lifting Apparatus,

Çelik H. K., Yılmaz D., Akıncı İ.

International Conference of Agricultural Engineering XXXVII Brazilian Agricultural Engineering International livestock Symposium-ILES VIII, Iguatu, Brezilya, 31 Ağustos - 04 Eylül 2008, cilt.1, ss.4

Harvesting and Threshing Mechanization of Sesame Plant

YILMAZ D., ÇELİK H. K., AKINCI İ.

International Conference of Agricultural Engineering XXXVII Brazilian Agricultural Engineering International livestock Symposium-ILES VIII, 31 Ağustos - 04 Eylül 2008, cilt.1, ss.5