Akademik Veri Yönetim Sistemi
JOURNAL OF AGRICULTURAL ENGINEERING (Pavia), cilt.55, sa.1, ss.136-148, 2024 (SCI-Expanded)
A rotary drum mower (RDM) is a tractor-mounted mechanism used for harvesting green fodder crops. It faces dynamic forces from rough field surfaces and cutting resistance, posing design challenges and potential failures. This study aims to present a well-designed procedure for analyzing the structural strength of an RDM during harvesting, employing both experimental and engi- neering simulation methods. A specific harvesting scenario was created to simulate realistic load conditions. Experimental testing and advanced computer-aided engineering (CAE) simulations were conducted. Tractor power take-off torque measurements dur- ing harvesting revealed values of 231.07 Nm, 264.44 Nm, and 269.39 Nm at speeds of 8.56 km h-1, 12.6 km h-1, and 16.23 km h-1, respectively. Finite element analysis (FEA) was conducted to determine stress levels in the RDM components (RDM165-A- 004, RDM165-B-003, and RDM165-B-004). The FEA stress results ranged from 5.070 MPa to 20.600 MPa, 13.800 MPa to 28.600 MPa, and 5.400 MPa to 27.550 MPa, respectively. Experimental testing yielded stress results ranging from 2.127 MPa to 18.600 MPa, 14.618 MPa to 33.229 MPa, and 8.838 MPa to 31.248 MPa, respectively. The comparison between experimen- tal and FEA results showed a reasonable correlation. FEA visual outputs provided insights into the maximum equivalent stress and deformation distributions on the RDM, with no indications of fail- ure in the machine’s structure observed in either the experimental or numerical analyses. In conclusion, this study demonstrates that the machine analyzed operates safely under harvesting conditions. Moreover, the combination of experimental and advanced CAE methodologies presented in this research offers a valuable approach for future investigations into the complex stress and deformation evaluations of rotary drum mowers.