Eğitim Bilgileri
2001 - 2006
2001 - 2006Doktora
Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalürji Ve Malzeme Mühendisliği, Türkiye
1998 - 2001
1998 - 2001Yüksek Lisans
Orta Doğu Teknik Üniversitesi, Fen Bilimleri Enstitüsü, Metalürji Ve Malzeme Mühendisliği, Türkiye
1994 - 1998
1994 - 1998Lisans
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalürji Ve Malzeme Mühendisliği, Türkiye
Yaptığı Tezler
2006
2006Doktora
Karbotermik Yöntemle Hekzagonal Bor Nitrür Üretimi
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği
2001
2001Yüksek Lisans
Kurşun Magnezyum Niobat-Kurşun Titanat Piezoseramiklerinin Üretimi ve Karakterizasyonu
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalürji Ve Malzeme Mühendisliği
Yabancı Diller
C1 İleri
C1 İleriİngilizce
Araştırma Alanları
Makina Mühendisliği
Konstrüksiyon ve İmalat
Döküm Yöntemleri
Malzeme
Metalurji ve Malzeme Mühendisliği
Malzeme Bilimi ve Mühendisliği
Malzeme Testi ve Kontrolü
Mekanik Özellikler
Isıl İşlem
Malzeme Karakterizasyonu
Metalik Malzemeler
Üretim Metalurjisi
Toz Metalurjisi
Mühendislik ve Teknoloji
Akademik Unvanlar / Görevler
2018 - Devam Ediyor
2018 - Devam EdiyorProf. Dr.
Akdeniz Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2013 - 2018
2013 - 2018Doç. Dr.
Akdeniz Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2009 - 2013
2009 - 2013Yrd. Doç. Dr.
Akdeniz Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
2007 - 2009
2007 - 2009Araştırma Görevlisi Dr.
Akdeniz Üniversitesi, Mühendislik Fakültesi, Makine Mühendisliği Bölümü
1998 - 2007
1998 - 2007Araştırma Görevlisi
Orta Doğu Teknik Üniversitesi, Mühendislik Fakültesi, Metalurji Ve Malzeme Mühendisliği
Yönetimsel Görevler
2010 - 2015
2010 - 2015Bölüm Başkan Yardımcısı
Akdeniz Üniversitesi
Yönetilen Tezler
2016
2016Yüksek Lisans
Zamak-5 Çinko-Alüminyum Alaşımının Bileşim Modifikasyonunun Mikroyapı Ve Mekanik Özelliklere Etkisinin Belirlenmesi
ÇAMURLU H. E.
M.Koçyiğit(Öğrenci)
2011
2011Yüksek Lisans
Alüminyum Matrisli Kompozitlerin Sıcak Presle Üretiminde Seramik Partiküllerin Sol-Jel Yöntemiyle Modifiye Edilmesinin Mekanik Özelliklere Etkisi”, Akdeniz Üniversitesi Fen Bilimleri Enstitüsü
ÇAMURLU H. E.
Ş.ÖZDOĞAN(Öğrenci)
2011
2011Yüksek Lisans
Alüminyum Matrisli Kompozitlerin Basınçsız Sinterleme ile Üretimi ve Karakterizasyonu
ÇAMURLU H. E.
E.BAŞAR(Öğrenci)
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
2023
2023Volume Combustion Synthesis in Fe–Ti–C and Fe–Ti Systems
Kocyigit M., ÇAMURLU H. E.
Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
, cilt.54, sa.1, ss.320-332, 2023 (SCI-Expanded)
2016
2016Nanocomposite glass coatings containing hexagonal boron nitride nanoparticles
ÇAMURLU H. E., AKARSU E., ArsIan O., MATHUR S.
CERAMICS INTERNATIONAL
, cilt.42, sa.7, ss.8856-8862, 2016 (SCI-Expanded)
2016
2016Modification of hexagonal boron nitride nanoparticles with fluorosilane
ÇAMURLU H. E., MATHUR S., Arslan O., AKARSU E.
CERAMICS INTERNATIONAL
, cilt.42, sa.5, ss.6312-6318, 2016 (SCI-Expanded)
2014
2014Comparative catalytic study on the carbothermic formation of hexagonal boron nitride with Li, Na, K and Ca carbonates
ÇAMURLU H. E., Gencer A., Becer B.
JOURNAL OF MATERIALS SCIENCE
, cilt.49, sa.1, ss.371-379, 2014 (SCI-Expanded)
2013
2013Catalytic effect of potassium carbonate on carbothermic production of hexagonal boron nitride
ÇAMURLU H. E., GENÇER A., BECER B., ÖZDOĞAN S.
CERAMICS INTERNATIONAL
, cilt.39, sa.8, ss.8589-8595, 2013 (SCI-Expanded)
2013
2013Production of stable hydrosols of crystalline TiO 2 nanoparticles synthesized at relatively low temperatures in diverse media
BURUNKAYA E., Akarsu M., ÇAMURLU H. E., KESMEZ O., YEŞİL Z., ASİLTÜRK M., et al.
Applied Surface Science
, cilt.265, ss.317-323, 2013 (SCI-Expanded)
2012
2012Hydrophilic hybrid SiO2:polyethylene glycol-3-isocyanato-propyltrietoxysilane nanocomposite films
BURUNKAYA E., Kesmez Ö., KİRAZ N., ÇAMURLU H. E., Asilturk M., ARPAÇ E.
THIN SOLID FILMS
, cilt.522, ss.238-246, 2012 (SCI-Expanded)
2012
2012The effects and roles of CaCO3 and CaO in the carbothermic formation of h-BN
Ozkenter A. A., ÇAMURLU H. E., Sevinc N.
JOURNAL OF CERAMIC PROCESSING RESEARCH
, cilt.13, sa.5, ss.533-540, 2012 (SCI-Expanded)
2012
2012Effect of external ultrasonic treatment on hypereutectic cast aluminium-silicon alloy
ÜNAL N., ÇAMURLU H. E., KOÇAK S., DÜZTEPE G.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
, cilt.25, sa.4, ss.246-250, 2012 (SCI-Expanded)
2012
2012Sol-gel thin films with anti-reflective and self-cleaning properties
ÇAMURLU H. E., Kesmez Ö., BURUNKAYA E., KİRAZ N., Yeşil Z., Asilturk M., et al.
CHEMICAL PAPERS
, cilt.66, sa.5, ss.461-471, 2012 (SCI-Expanded)
2011
2011Friction stir processing and characterisation of A380 cast aluminium alloy
ÇAMURLU H. E., ÜNAL N.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH
, cilt.24, sa.6, ss.357-362, 2011 (SCI-Expanded)
2011
2011Mechanochemical and volume combustion synthesis of ZrB2
Akgun B., ÇAMURLU H. E., Topkaya Y., Sevinc N.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS
, cilt.29, sa.5, ss.601-607, 2011 (SCI-Expanded)
2011
2011Effect of Na2CO3 on hexagonal boron nitride prepared from urea and boric acid
ÇAMURLU H. E.
CERAMICS INTERNATIONAL
, cilt.37, sa.6, ss.1993-1999, 2011 (SCI-Expanded)
2011
2011Effect of acid, water and alcohol ratios on sol-gel preparation of antireflective amorphous SiO2 coatings
Kesmez Ö., BURUNKAYA E., KİRAZ N., ÇAMURLU H. E., Asilturk M., ARPAÇ E.
JOURNAL OF NON-CRYSTALLINE SOLIDS
, cilt.357, sa.16-17, ss.3130-3135, 2011 (SCI-Expanded)
2011
2011Preparation of single phase molybdenum boride
Camurlu H. E.
JOURNAL OF ALLOYS AND COMPOUNDS
, cilt.509, sa.17, ss.5431-5436, 2011 (SCI-Expanded)
2011
2011Crosslinked sodium alginate and sodium alginate-clinoptilolite (natural zeolite) composite membranes for pervaporation separation of dimethylformamide-water mixtures: A comparative study
Kahya S., Sanli O., Camurlu E.
DESALINATION AND WATER TREATMENT
, cilt.25, sa.1-3, ss.297-309, 2011 (SCI-Expanded)
2010
2010Antibacterial glass films prepared on metal surfaces by sol-gel method
KİRAZ N., Kesmez Ö., BURUNKAYA E., Budama L., ACAR B., Asilturk M., et al.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.56, sa.3, ss.227-235, 2010 (SCI-Expanded)
2010
2010Sol-gel synthesis of 3-(triethoxysilyl)propylsuccinicanhydride containing fluorinated silane for hydrophobic surface applications
KİRAZ N., BURUNKAYA E., Kesmez Ö., Asilturk M., ÇAMURLU H. E., ARPAÇ E.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.56, sa.2, ss.157-166, 2010 (SCI-Expanded)
2010
2010Sol-gel synthesis of IPTES and D10H consisting fluorinated silane system for hydrophobic applications
BURUNKAYA E., KİRAZ N., Kesmez Ö., Asilturk M., ÇAMURLU H. E., ARPAÇ E.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.56, sa.2, ss.99-106, 2010 (SCI-Expanded)
2010
2010Effect of amine catalysts on preparation of nanometric SiO2 particles and antireflective films via sol-gel method
Kesmez Ö., KİRAZ N., BURUNKAYA E., ÇAMURLU H. E., Asilturk M., ARPAÇ E.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.56, sa.2, ss.167-176, 2010 (SCI-Expanded)
2010
2010Preparation of aluminum-doped zinc oxide (AZO) nano particles by hydrothermal synthesis
BURUNKAYA E., KİRAZ N., KESMEZ O., ÇAMURLU H. E., Asilturk M., ARPAÇ E.
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY
, cilt.55, sa.2, ss.171-176, 2010 (SCI-Expanded)
2010
2010Sn4+ or Ce3+ doped TiO2 photocatalytic nanometric films on antireflective nano-SiO2 coated glass
BURUNKAYA E., KESMEZ O., KİRAZ N., ÇAMURLU H. E., ASİLTÜRK M., ARPAÇ E.
MATERIALS CHEMISTRY AND PHYSICS
, cilt.120, sa.2-3, ss.272-276, 2010 (SCI-Expanded)
2010
2010Preparation of antireflective SiO2 nanometric films
Kesmez O., ÇAMURLU H. E., BURUNKAYA E., ARPAÇ E.
CERAMICS INTERNATIONAL
, cilt.36, sa.1, ss.391-394, 2010 (SCI-Expanded)
2009
2009Sol-gel preparation and characterization of anti-reflective and self-cleaning SiO2-TiO2 double-layer nanometric films
Kesmez O., ÇAMURLU H. E., BURUNKAYA E., ARPAÇ E.
SOLAR ENERGY MATERIALS AND SOLAR CELLS
, cilt.93, sa.10, ss.1833-1839, 2009 (SCI-Expanded)
2009
2009Catalytic effect of alkaline earth oxides on carbothermic formation of hexagonal boron nitride
ÇAMURLU H. E., Topkaya Y., Sevinc N.
CERAMICS INTERNATIONAL
, cilt.35, sa.6, ss.2271-2275, 2009 (SCI-Expanded)
2009
2009Self-propagating high-temperature synthesis of ZrB2 or TiB2 reinforced Ni-Al composite powder
ÇAMURLU H. E., MAGLIA F.
JOURNAL OF ALLOYS AND COMPOUNDS
, cilt.478, sa.1-2, ss.721-725, 2009 (SCI-Expanded)
2009
2009Preparation of nano-size ZrB2 powder by self-propagating high-temperature synthesis
ÇAMURLU H. E., MAGLIA F.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
, cilt.29, sa.8, ss.1501-1506, 2009 (SCI-Expanded)
2009
2009Electrical, structural, and microstructural characterization of nanometric La0.9Sr0.1Ga0.8Mg0.2O3-delta (LSGM) prepared by high-pressure spark plasma sintering
Maglia F., Anselmi-Tamburini U., Chiodelli G., ÇAMURLU H. E., Dapiaggi M., Munir Z. A.
SOLID STATE IONICS
, cilt.180, sa.1, ss.36-40, 2009 (SCI-Expanded)
2008
2008Formation of TiB2 by volume combustion and mechanochemical process
Bilgi E., ÇAMURLU H. E., Akgun B., Topkaya Y., Sevinc N.
MATERIALS RESEARCH BULLETIN
, cilt.43, sa.4, ss.873-881, 2008 (SCI-Expanded)
2008
2008Synthesis and characterization of pure and doped (Na, Ca, Sr) nanograined LaMnO3 magnetoresistive ceramics
MAGLIA F., MALAVASI L., ÇAMURLU H. E., TACCA A., CHIODELLI G., SPINOLO G., et al.
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY
, cilt.8, sa.2, ss.846-853, 2008 (SCI-Expanded)
2008
2008Effect of calcium carbonate addition on carbothermic formation of hexagonal boron nitride
ÇAMURLU H. E., Sevinc N., TOPKAYA Y.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
, cilt.28, sa.3, ss.679-689, 2008 (SCI-Expanded)
2007
2007Synthesis of zirconium diboride-zirconium nitride composite powders by self-propagating high-temperature synthesis
Camurlu H. E., MAGLIA F.
JOURNAL OF MATERIALS SCIENCE
, cilt.42, sa.24, ss.10288-10295, 2007 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
2018
2018Printing Parameters Effect on Surface Characteristics of 3D Printed PLA Materials
KOVAN V., TEZEL T., TOPAL E. S., ÇAMURLU H. E.
Machines Technologies Materials , cilt.12, sa.7, ss.256-269, 2018 (Hakemli Dergi)
2018
2018Effect of Printing Parameters on Mechanical Properties of 3D Printed PLA/Carbon Fibre Composites
KOVAN V., TEZEL T., ÇAMURLU H. E., TOPAL E. S.
Materials Science Non-Equilibrium Phase Transformations , cilt.4, sa.4, ss.126-128, 2018 (Hakemli Dergi)
2016
2016Formation Of Near-Nano Size TiB2-TiN-Al2O3 Powder By SHS
ÇAMURLU H. E., Derin B.
Machines, Technologies, Materials , cilt.11, ss.49-51, 2016 (Hakemli Dergi)
2009
2009Production and Characterization of Strontium and Magnesium Doped Lanthanum-Gallium Oxide (LSGM) Ceramics
ÇAMURLU H. E., Maglia F., Chiodelli G.
Int. J. Microstructure and Materials Properties , cilt.4, ss.301-310, 2009 (Scopus)
2009
2009Formation of Zr(C,N) - ZrB2 Composite Powders by Self-Propagating High- Temperature Synthesis (SHS)
ÇAMURLU H. E., Maglia F.
Int. J. Microstructure and Materials Properties , cilt.4, ss.311-319, 2009 (Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2018
2018Effect Of Mg Addition on Al4Cu Powder Metallurgy Alloy
ÇAMURLU H. E., Bayram V.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.195, (Özet Bildiri)
2018
2018Preparation of Al2O3 Reinforced Aluminum Matrix Composites by Powder Metallurgy
ÇAMURLU H. E., Tekyurt Z.
1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), Karabük, Türkiye, 22 - 24 Mart 2018, ss.196, (Özet Bildiri)
2017
2017Powder Metallurgical Production and Characterization of Aluminum Matrix Composites Reinforced with TiC-Al2O3
ÇAMURLU H. E., Dere M. A., Güldük G., Savaş M.
International Advanced Researches & Engineering Congress-2017, Osmaniye, Türkiye, 16 - 18 Kasım 2017, ss.736-739, (Tam Metin Bildiri)
2017
2017Effect of Cooling Rate on Microstructure and Hardness of Nodular Cast Iron
ÇAMURLU H. E., Güner E., Taşkan U.
8th International Advanced Technologies Symposium 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.135, (Özet Bildiri)
2017
2017Preparation of Single Phase CrSi
ÇAMURLU H. E., Milanese C., Maglia F.
8th International Advanced Technologies Symposium 2017, Elazığ, Türkiye, 19 - 22 Ekim 2017, ss.130, (Özet Bildiri)
2017
2017Al4Cu-SiC Functionally Graded Composites Obtained by Powder Metallurgical Routes
ÇAMURLU H. E., Dere M., Katı A.
RoPM&AM 2017 5th International Conference On Powder Metallurgy & Advanced Materials, Cluj-Napoco, Romanya, 17 - 20 Eylül 2017, ss.108, (Özet Bildiri)
2017
2017Preparation and Mechanical Properties of Carbon Nanotube Reinforced Aluminum Matrix Composites
ÇAMURLU H. E., Kazaz A., Dere M., Evlek H.
International Conference on Diamond and Carbon Materials, Chicago, Amerika Birleşik Devletleri, 17 - 18 Temmuz 2017, ss.78, (Özet Bildiri)
2016
2016Effect of Al part size on SHS formation of TiB2-Al2O3 powder
ÇAMURLU H. E.
18th International Metallurgy-Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.223-226, (Tam Metin Bildiri)
2015
2015SURFACE ROUGHNESS EFFECT ON THE 3D PRINTED BUTT JOINTS STRENGTH
KOVAN V., Altan G., TOPAL E. S., ÇAMURLU H. E.
BALTTRIB 8th International Scientific Conference, Kaunas, Litvanya, 26 - 27 Kasım 2015, ss.117-121, (Tam Metin Bildiri)
2015
2015Formation of Nanoparticles By SHS
ÇAMURLU H. E.
13. International Symposium On Self-Propagating High Temperature Synthesis, Antalya, Türkiye, 12 - 15 Ekim 2015, ss.50-51, (Özet Bildiri)
2013
2013Production And Characterisation Of Titanium Diboride Reinforced Aluminum Matrix Composites Via Hot Pressing Method
ÇAMURLU H. E., ÖZDOĞAN Ş.
Proceedings of the 3rd International Science and Technology Conference (ISTEC 2013), Roma, İtalya, 25 - 27 Haziran 2013, ss.1, (Tam Metin Bildiri)
2010
2010Preparation of Silicon Carbide-Aluminum Surface Composites by Friction Stir Processing (FSP) and Their Properties
ÇAMURLU H. E., ÜNAL N.
Proceedings of the 15th International Metallurgy-Materials Congress, İstanbul, Türkiye, 11 - 13 Kasım 2010, ss.265-272, (Tam Metin Bildiri)
2010
2010Alüminyum bronzunun sürtünme karıştırma yöntemiyle yüzey özelliklerinin iyileştirilmesi
Şahiner B., ÜNAL N., ÇAMURLU H. E.
Proceedings of the 13th International Denizli Materials Symposium, Denizli, Türkiye, 13 - 15 Ekim 2010, ss.125-130, (Tam Metin Bildiri)
2008
2008Al-Fe-Ni Bronz Dökümünde Tane İnceltme Üzerine Bir Çalışma
ÜNAL N., Kayak A., ÇAMURLU H. E.
Proceedings of the 12th International Materials Symposium, Denizli, Türkiye, 15 - 17 Ekim 2008, ss.102-108, (Tam Metin Bildiri)
2005
2005Fazla Bor Oksitin Karbotermik Yöntemle Hekzagonal Bor Nitrür Üretimi Sırasında Oluşan Bor Karbüre Etkisi
ÇAMURLU H. E., SEVİNÇ N., TOPKAYA Y.
Proceedings of the 12th International Metallurgy-Materials Congress, İstanbul, Türkiye, 28 Ekim - 02 Kasım 2005, ss.1512-1516
Desteklenen Projeler
2017 - 2019
2017 - 2019Granit Fabrikası Atığının Tuğla Üretiminde Kullanılmasının Araştırılması
Yükseköğretim Kurumları Destekli Proje
KOÇKAL N. U. (Yürütücü), ÇAMURLU H. E., KUL GÜL N. İ.
2015 - 2017
2015 - 2017YÜKSEK MUKAVEMETLİ ALÜMİNYUM SiC KARBON NANOTÜP TAKVİYELİ KOMPOZİTLERİN AMMC ALAŞIMLARIN OTOMOTİV ENDÜSTRİSİ İÇİN GELİŞTİRİLMESİ
Yükseköğretim Kurumları Destekli Proje
KAZAZ A. (Yürütücü), ÇAMURLU H. E.
2011 - 2013
2011 - 2013Hekzagonal Bor Nitrür İçeren, Dereceli Nanokompozit Kaplamaların Sol Jel Yöntemiyle Üretimi ve Karakterizasyonu
TÜBİTAK Projesi
ÇAMURLU H. E. (Yürütücü)
2009 - 2010
2009 - 2010Yüksek Verimle ve Yüksek Saflıkta Titanyum Diborür Üretimi
Diğer Resmi Kurumlarca Desteklenen Proje
ÇAMURLU H. E. (Yürütücü)
2007 - 2009
2007 - 2009Sürtünme Karıştırma ile İşleme Yöntemiyle Yüzey Kompozitlerinin Üretimi ve Karakterizasyonu
TÜBİTAK Projesi
ÇAMURLU H. E.
Bilimsel Kuruluşlardaki Üyelikler / Görevler
2012 - Devam Ediyor
2012 - Devam EdiyorTÜRK TOZ METALURJİSİ DERNEĞİ
Üye
2006 - Devam Ediyor
2006 - Devam EdiyorMETALURJİ MÜHENDİSLERİ ODASI
Üye
Ödüller
Aralık 2011
Aralık 2011Teşvik Ödülü
Akdeniz Üniveristesi
Eylül 2006
Eylül 2006GENÇ ARAŞTIRMACI ÖDÜLÜ
METALURJİ MÜHENDİSLERİ ODASI
Atıflar
Toplam Atıf Sayısı (WOS): 777
h-indeksi (WOS): 18
Jüri Üyelikleri
Nisan-2018
Nisan 2018Tez Savunma (Doktora)
- Süleyman Demirel Ünivrsitesi
Şubat-2018
Şubat 2018Tez Savunma (Yüksek Lisans)
- Süleyman Demirel Ünivrsitesi
Ocak-2018
Ocak 2018Tez Savunma (Yüksek Lisans)
- Süleyman Demirel Ünivrsitesi
Kasım-2014
Kasım 2014