Prof. Dr. GÜRKAN ALTAN

Yayın Ağı

Makaleler 22

1. Effect of Blade Gap Ratio on Turbine Performance in Drag-Based Vertical-Axis Wind Turbines

ALTAN G., DEDA ALTAN B.

Processes , cilt.12, sa.10, 2024 (SCI-Expanded)

2. Testing of mechanical butt joints in composite structures

ALTAN G.

MATERIALS TESTING , cilt.63, sa.9, ss.816-821, 2021 (SCI-Expanded)

3. Numerical and experimental analysis of a 3D printed Savonius rotor with built-in extension plate

Altan B., KOVAN V., Altan G.

WIND AND STRUCTURES , cilt.27, sa.1, ss.1-9, 2018 (SCI-Expanded)

4. INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES

Altan G.

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL , cilt.12, sa.2, ss.65-70, 2018 (ESCI)

5. Experimental Investigation on Thermal Conductivity of Building Materials Manufactured from Paper Wastes

ALTAN G., DEDA ALTAN B.

IJRASET : INTERNATIONAL JOURNAL FOR RESEARCH IN APPLIED SCIENCE AND ENGINEERING TECHNOLOGY , cilt.6, sa.5, ss.33-39, 2018 (Hakemli Dergi)

6. Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints

KOVAN V., Altan G., TOPAL E. S.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.5, ss.2197-2201, 2017 (SCI-Expanded)

7. Investigation of 3D printed Savonius rotor performance

Altan B., Altan G., KOVAN V.

RENEWABLE ENERGY , cilt.99, ss.584-591, 2016 (SCI-Expanded)

8. Flexural behavior of 3D printed honeycomb sandwich structures with waste filler material

Altan G., KOVAN V.

MATERIALS TESTING , cilt.58, sa.10, ss.833-838, 2016 (SCI-Expanded)

9. An investigation on damage loads of mechanical butt joints in composite structures

Altan G., Topcu M.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.34, sa.10, ss.839-853, 2015 (SCI-Expanded)

10. Fatigue and static performances of butterfly joints under hygrothermal exposure conditions

Altan G., Topcu M.

JOURNAL OF APPLIED POLYMER SCIENCE , cilt.127, sa.5, ss.3374-3381, 2013 (SCI-Expanded)

11. Assessment of the buckling strengths of composite plates impacted with different impact loads and points

Altan G.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.29, sa.23, ss.3455-3462, 2010 (SCI-Expanded)

12. Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures

Altan G., Topcu M.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.24, sa.6, ss.1245-1254, 2010 (SCI-Expanded)

13. The Effects of the Butterfly Joints on Failure Loads and Fatigue Performance of Composite Structures

Altan G., Topcu M., Callioglu H.

SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS , cilt.17, sa.3, ss.199-212, 2010 (SCI-Expanded)

14. Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution

Altan G., Topcu M., Bektas N. B., Altan B.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.22, sa.12, ss.2318-2327, 2008 (SCI-Expanded)

15. THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF AN ALUMINIUM COMPOSITE DISC UNDER LINEARLY DECREASING THERMAL LOADING

Topcu M., Altan G., Callioglu H., Altan B.

ADVANCED COMPOSITES LETTERS , cilt.17, sa.3, ss.87-96, 2008 (SCI-Expanded)

16. Soğuk Şekillendirilmiş Çelik Çubukların Eğilmesi Durumunda Oluşan Artık Gerilmelerin Hesabı

Atlıhan G., TOPCU M., CALLIOGLU H., ALTAN G.

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ , cilt.13, sa.1, ss.111-118, 2007 (Hakemli Dergi)

17. An experimental investigation on damage loads of butterfly joints in composite structures

Topcu M., Altan G., Ergun E.

ADVANCED COMPOSITES LETTERS , cilt.16, sa.6, ss.197-204, 2007 (SCI-Expanded)

18. Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading

CALLIOGLU H., TOPCU M., Altan G.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.24, sa.8, ss.831-838, 2005 (SCI-Expanded)

19. Elastic-plastic stress analysis of thermoplastic composite beams loaded by a single force

TOPCU M., CONKUR E., Altan G.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.18, sa.3, ss.181-193, 2005 (SCI-Expanded)

20. Elastic-plastic and residual stress analysis of an aluminum metal-matrix composite disk under internal pressures

BEKTAS N., TOPCU M., CALLIOGLU H., Altan G.

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES , cilt.24, sa.7, ss.753-762, 2005 (SCI-Expanded)

21. Tekil Kuvvetle Yüklenmiş Örgülü Çelik Fiber Takviyeli Termoplastik Kompozit Ankastre Kirişlerde Artık Gerilme Analizi

ALTAN G., Atlıhan G., TOPCU M.

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ , cilt.10, sa.1, ss.119-125, 2004 (Hakemli Dergi)

22. Elastic–Plastic and Residual Stress Analysis of an Aluminum Disc under Internal Pressure

BEKTAS N., ALTAN G., ERGUN E., Demirdal G.

PAMUKKALE ÜNİVERSİTESİ MÜHENDİSLİK BİLİMLERİ DERGİSİ , cilt.10, sa.2, ss.201-206, 2004 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 4

1. Surface roughness effect on the 3D printed butt joints strength

KOVAN V., Altan G., TOPAL E. S., ÇAMURLU H. E.

The 8th International Conference BALTTRIB'2015, Kaunas, Litvanya, 26 - 27 Kasım 2015, ss.117-121, (Tam Metin Bildiri)

2. Periyodik hücresel yapıların titreşim davranışlarının incelenmesi: nümerik çalışma

Atlıhan G., KOVAN V., TOPCU M., ERGUN E., ALTAN G.

4th International Materials Symposium (IMSP’2012), Denizli, Türkiye, 10 - 12 Ekim 2012, ss.960-967, (Tam Metin Bildiri)

3. Elasto-plastic stress analysis of surface roughness effect on press fits

KOVAN V., ALTAN G.

6th International Scientific Conference on Tribology, BALTTRIB 2011, Kaunas, Litvanya, 17 - 19 Kasım 2011, ss.122-126, (Tam Metin Bildiri)

4. Metal Matrisli Ortotropik Bir Diskin Üretimi ve Mekanik Özelliklerinin Tespiti

ALTAN G., TOPCU M., ERGUN E., CALLIOGLU H.

11th International Materials Symposium, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.835-841

Metrikler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

199

H-İndeks (Scopus)

Atıf (Scholar)

142

Prof. Dr. GÜRKAN ALTAN

Yayınlar & Eserler

1. Effect of Blade Gap Ratio on Turbine Performance in Drag-Based Vertical-Axis Wind Turbines

2. Testing of mechanical butt joints in composite structures

3. Numerical and experimental analysis of a 3D printed Savonius rotor with built-in extension plate

4. INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES

5. Experimental Investigation on Thermal Conductivity of Building Materials Manufactured from Paper Wastes

6. Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints

7. Investigation of 3D printed Savonius rotor performance

8. Flexural behavior of 3D printed honeycomb sandwich structures with waste filler material

9. An investigation on damage loads of mechanical butt joints in composite structures

10. Fatigue and static performances of butterfly joints under hygrothermal exposure conditions

11. Assessment of the buckling strengths of composite plates impacted with different impact loads and points

12. Experimental and numerical assessment of the improvement of the load-carrying capacities of butterfly-shaped coupling components in composite structures

13. The Effects of the Butterfly Joints on Failure Loads and Fatigue Performance of Composite Structures

14. Elastic-plastic thermal stress analysis of an aluminum composite disc under parabolic thermal load distribution

15. THERMAL ELASTIC-PLASTIC STRESS ANALYSIS OF AN ALUMINIUM COMPOSITE DISC UNDER LINEARLY DECREASING THERMAL LOADING

16. Soğuk Şekillendirilmiş Çelik Çubukların Eğilmesi Durumunda Oluşan Artık Gerilmelerin Hesabı

17. An experimental investigation on damage loads of butterfly joints in composite structures

18. Stress analysis of curvilinearly orthotropic rotating discs under mechanical and thermal loading

19. Elastic-plastic stress analysis of thermoplastic composite beams loaded by a single force

20. Elastic-plastic and residual stress analysis of an aluminum metal-matrix composite disk under internal pressures

21. Tekil Kuvvetle Yüklenmiş Örgülü Çelik Fiber Takviyeli Termoplastik Kompozit Ankastre Kirişlerde Artık Gerilme Analizi

22. Elastic–Plastic and Residual Stress Analysis of an Aluminum Disc under Internal Pressure

1. Surface roughness effect on the 3D printed butt joints strength

2. Periyodik hücresel yapıların titreşim davranışlarının incelenmesi: nümerik çalışma

3. Elasto-plastic stress analysis of surface roughness effect on press fits

4. Metal Matrisli Ortotropik Bir Diskin Üretimi ve Mekanik Özelliklerinin Tespiti

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Atıf (Scholar)

H-İndeks (Scholar)

Proje

Tez Danışmanlığı

Açık Erişim