INVESTIGATION ON FLEXURAL BEHAVIORS OF I-SHAPED JOINTED COMPOSITE PLATES


Creative Commons License

Altan G.

ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, cilt.12, sa.2, ss.65-70, 2018 (ESCI) identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 12 Sayı: 2
  • Basım Tarihi: 2018
  • Doi Numarası: 10.12913/22998624/89756
  • Dergi Adı: ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL
  • Derginin Tarandığı İndeksler: Emerging Sources Citation Index (ESCI)
  • Sayfa Sayıları: ss.65-70
  • Anahtar Kelimeler: Four point bending, Geometric joint, Failure behaviour, Butt, Composite, LAP JOINTS, ADHESIVE JOINTS, STRENGTH, FAILURE, DESIGN
  • Akdeniz Üniversitesi Adresli: Hayır

Özet

In this study, the flexural behaviors of a composite plate jointed with I profile jointing element have been carried out experimentally and numerically. As a load type, four point flexural tests have been used in order to study performances of jointed composite plates under bending load. The effects of jointing geometry parameters ratio of the width of lock to width of semi-specimen (b/W), lock middle/end width to the width of lock (z/b) and the length of lock to the width of semi-specimen (h/2W) have been investigated. According to the investigation optimum jointing parameters have been found with the h/2w ratio of 0.5, b/w ratio of 0.5 and z/b ratio of 0.5. Abaqus 6.11 finite element program has been used in order to support the results obtained from the experiments. Damages have been mostly seen on jointing lock elements.