Yayınlar & Eserler

Yayın Ağı
SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler 19

Best strengthening schemes for laminated composite cylindrical panels under external pressure

ÇAĞDAŞ İ. U.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.47, sa.9, 2025 (SCI-Expanded) identifier

Structural behavior of MDF beams reinforced by unidirectional glass fiber reinforced thermoset polyurethane outer layers

ÇAĞDAŞ İ. U., Saeedi S.
Composite Structures , cilt.295, 2022 (SCI-Expanded) identifier

A modified three rail shear test procedure for rigid foamed materials

Gökova M., Sargın T., Aliyev R., Çağdaş İ. U.
Journal Of Cellular Plastics , cilt.0, sa.0, ss.1-25, 2022 (SCI-Expanded)

A modified analytical expression to determine the quasi-static pre-indentation loads of metal-faced sandwich beams

ÇAĞDAŞ İ. U., TAŞKIN M.
JOURNAL OF SANDWICH STRUCTURES & MATERIALS , cilt.22, sa.5, ss.1404-1425, 2020 (SCI-Expanded) identifier identifier

Optimal design of variable stiffness laminated composite truncated cones under lateral external pressure

ÇAĞDAŞ İ. U.
OCEAN ENGINEERING , cilt.145, ss.268-276, 2017 (SCI-Expanded) Creative Commons License identifier identifier

Optimal design of filament wound truncated cones under axial compression

ÇAĞDAŞ İ. U.
COMPOSITE STRUCTURES , cilt.170, ss.250-260, 2017 (SCI-Expanded) identifier identifier

Effect of Fiber Orientation on Buckling and First-Ply Failures of Cylindrical Shear-Deformable Laminates

Cagdas I. U., ADALI S.
JOURNAL OF ENGINEERING MECHANICS , cilt.139, sa.8, ss.967-978, 2013 (SCI-Expanded) identifier identifier

Buckling of cross-ply laminates subject to linearly varying compressive loads and in-plane boundary restraints

ÇAĞDAŞ İ. U., ADALI S.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.26, sa.2, ss.193-215, 2013 (SCI-Expanded) identifier identifier

Optimal shapes of clamped-simply supported columns under distributed axial load and stress constraint

ÇAĞDAŞ İ. U., ADALI S.
ENGINEERING OPTIMIZATION , cilt.45, sa.2, ss.123-139, 2013 (SCI-Expanded) identifier identifier

Design of a laminated composite variable curvature panel under uniaxial compression

Cagdas I., ADALI S.
ENGINEERING COMPUTATIONS , cilt.29, sa.1-2, ss.48-64, 2012 (SCI-Expanded) identifier identifier

Effect of in-plane boundary restraints on optimal design of skew laminates under buckling loads

ÇAĞDAŞ İ. U., ADALI S.
COMPOSITE STRUCTURES , cilt.93, sa.8, ss.2060-2069, 2011 (SCI-Expanded) identifier identifier

Stability analysis of cross-ply laminated shells of revolution using a curved axisymmetric shell finite element

Cagdas I. U.
THIN-WALLED STRUCTURES , cilt.49, sa.6, ss.732-742, 2011 (SCI-Expanded) identifier identifier

Buckling of cross-ply cylinders under hydrostatic pressure considering pressure stiffness

ÇAĞDAŞ İ. U., ADALI S.
OCEAN ENGINEERING , cilt.38, sa.4, ss.559-569, 2011 (SCI-Expanded) identifier identifier

Assessment of the accuracy of homogenization in finite element analysis of grid plates under transverse loads

Cagdas I. U.
ENGINEERING COMPUTATIONS , cilt.27, sa.5-6, ss.676-693, 2010 (SCI-Expanded) identifier identifier

Optimal design of simply supported columns subject to distributed axial load and stress constraint

ADALI S., ÇAĞDAŞ İ. U.
OPTIMAL CONTROL APPLICATIONS & METHODS , cilt.30, sa.5, ss.505-520, 2009 (SCI-Expanded) identifier identifier

Iterative algorithms for optimal design of columns subject to a stress constraint

ADALI S., Cagdas I. U.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS , cilt.344, sa.5, ss.711-724, 2007 (SCI-Expanded) identifier identifier

Optimal sizing of piezo-actuators for minimum-deflection design of frames under uncertain loads

Adalı S., Sadek I. S., Bruch J. C., Sloss J. M., Cagdas I. U.
JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS , cilt.344, sa.5, ss.698-710, 2007 (SCI-Expanded) identifier identifier

Optimization of clamped columns under distributed axial load and subject to stress constraints

Cagdas I. U., ADALI S.
ENGINEERING OPTIMIZATION , cilt.39, sa.4, ss.453-469, 2007 (SCI-Expanded) identifier identifier

Deflection control of elastically restrained laminated frames under deterministic and uncertain loads using induced strain actuators

ADALI S., Sadek I. S., Bruch J. C., Sloss J. M., Cagdas I. U.
COMPOSITE STRUCTURES , cilt.76, sa.1-2, ss.2-13, 2006 (SCI-Expanded) identifier identifier
Diğer Dergilerde Yayınlanan Makaleler 8

Internal force transfer in segmental RC structures

Bashirzade S., Özcan O., Çağdaş İ. U.
Research on Engineering Structures and Materials , cilt.1, ss.1-24, 2024 (Scopus)

The influence of tangential edge restraints on the nonlinear response of laminated composite cylindrical panels subject to a pinching force

Çağdaş İ. U.
Konya Mühendislik Bilimleri Dergisi , cilt.10, sa.3, ss.623-633, 2022 (Hakemli Dergi) Creative Commons License

The Influence of Axial Compression on the Free Vibration Frequencies of Cross-ply Laminated and Moderately Thick Cylinders

ÇAĞDAŞ İ. U.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.1, ss.45-52, 2020 (ESCI) Creative Commons License identifier

Metal yüzlü sandviç konsol kirişlerde numune boyunun ölçülen temel titreşim frekansına etkisi

ÇAĞDAŞ İ. U., Aliyev R.
GAZİ ÜNİVERSİTESİ FEN BİLİMLERİ DERGİSİ PART: C TASARIM VE TEKNOLOJİ , cilt.1, ss.1-10, 2020 (Hakemli Dergi)

Basınç rijitliğinin hidrostatik basınç etkisi altındaki katmanlı kompozit silindirlerin burulmalı burkulmalarına etkisi

ÇAĞDAŞ İ. U.
Konya Mühendislik Bilimleri Dergisi , cilt.1, ss.1-10, 2020 (Hakemli Dergi)

Cam Elyaf Takviyeli Poliüretan Dış Yüzlü Sandviç Kirişlerin Eğilme Rijitliklerinin Konsol Kiriş Titreşim Deneyi İle Belirlenmesi

ÇAĞDAŞ İ. U., Yıldırım Ö.
Gazi Üniversitesi Mühendislik Bilimleri Dergisi , cilt.5, sa.3, ss.273-279, 2019 (Hakemli Dergi)

Unimodal Optimization of Axially Compressed Shear Deformable Columns

ÇAĞDAŞ İ. U.
International Journal of Computational and Experimental Science and Engineering , cilt.5, ss.100-104, 2019 (Hakemli Dergi)

Failure analysis of curved composite panels based on first-ply and buckling failures

ADALI S., ÇAĞDAŞ İ. U.
Procedia Engineering , cilt.10, ss.1591-1596, 2011 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 13

Optimal design of axially compressed sandwich composite cylinders having orthogrid core

Çağdaş İ. U.
ISARC 3rd International Scientific Research and Innovation Congress, İstanbul, Türkiye, 26 - 27 Ağustos 2022, ss.374-379, (Tam Metin Bildiri) Creative Commons License

Linearized stability analysis of space frames using a degenerated beam finite element

Çağdaş İ. U.
ISARC 3rd International Scientific Research and Innovation Congress, 26 - 27 Ağustos 2022, ss.380-386, (Tam Metin Bildiri) Creative Commons License

Failure analysis of curved composite panels based on first-ply and buckling failures

ADALI S., ÇAĞDAŞ İ. U.
11th International Conference on the Mechanical Behavior of Materials (ICM11), Como Lake, İtalya, 5 - 09 Haziran 2011, ss.3-5, (Tam Metin Bildiri)

Semi-analytical finite element vibration analysis of cross-ply cylinders

ÇAĞDAŞ İ. U., ADALI S.
ISTEC-2010 International Science & Technology Conference, Magusa, Kıbrıs (Kktc), 27 - 29 Ekim 2010, ss.3, (Tam Metin Bildiri)

Optimal design of a cylindrical composite panel under external pressure

ÇAĞDAŞ İ. U.
9th International Congress on Advances in Civil Engineering, Trabzon, Türkiye, 27 - 30 Ağustos 2010, ss.3-5, (Tam Metin Bildiri)

Finite element solution for curved composite panels under a compressive load

ADALI S., ÇAĞDAŞ İ. U.
AfriCOMP 2009, 1st African Conference on Computational Mechanics – An International Conference, Sun City, Güney Afrika, 7 - 11 Ocak 2009, ss.3-5, (Özet Bildiri)

Optimization of cylindrically curved composite panels under compressive loads

ÇAĞDAŞ İ. U., ADALI S.
ICCM17, Edinburg, Birleşik Krallık, 1 - 03 Ocak 2009, ss.3-5, (Özet Bildiri)

Effect of boundary conditions on optimal composite rectangular plates under non-uniform buckling loads

ADALI S., ÇAĞDAŞ İ. U.
ICCST6, Durban, Güney Afrika, 1 - 03 Ocak 2007, ss.3-5, (Özet Bildiri)

Non-local elastic modelling of statics and dynamics of nano-sized beams in an elastic medium under distributed loads

Duvaut G., Lene F., ADALI S., ÇAĞDAŞ İ. U.
ICCST6, Durban, Güney Afrika, 1 - 03 Ocak 2007, ss.3-5, (Özet Bildiri)

Optimization of columns under non-uniform axial loads

ADALI S., ÇAĞDAŞ İ. U.
Fifth South African Conference on Computational and Applied Mechanics, SACAM06, Cape Town, Güney Afrika, 16 - 18 Ocak 2006, ss.3-5, (Tam Metin Bildiri)

’Optimal design of elastically clamped columns subject to distributed axial load

ADALI S., ÇAĞDAŞ İ. U.
6th World Congress on Structural and Multidisciplinary Optimization, Rio De Janeiro, Brezilya, 30 Mayıs - 03 Haziran 2005, ss.3-5, (Tam Metin Bildiri)

Iterative algorithms for optimal design of columns subject to a stress constraint

ADALI S., ÇAĞDAŞ İ. U.
ICMSAO, Sharjah, Birleşik Arap Emirlikleri, 7 - 10 Şubat 2005, ss.3-5, (Tam Metin Bildiri)

Shape control of laminated frames under uncertain thermal and mechanical loads using piezoelectric actuators

ADALI S., Sadek I., Sloss J., Bruch J., ÇAĞDAŞ İ. U.
ICCM15, Durban, Güney Afrika, 1 - 03 Ocak 2005, ss.3-5, (Özet Bildiri)
Metrikler

Yayın

41

Yayın (WoS)

17

Yayın (Scopus)

18

Atıf (WoS)

56

H-İndeks (WoS)

4

Atıf (Scopus)

82

H-İndeks (Scopus)

5

Atıf (Scholar)

182

H-İndeks (Scholar)

8

Proje

3

Tez Danışmanlığı

3

Açık Erişim

4