Prof. Dr. İZZET UFUK &#199;AĞDAŞ

Bashirzade S., Özcan O., Çağdaş İ. U.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.47, sa.9, 2025 (SCI-Expanded)

4. Optimal graphene platelet reinforcement for filament wound imperfect cylinders under axial compression

Çağdaş İ. U., Adali S.

JOURNAL OF COMPOSITE MATERIALS , cilt.1, ss.1-14, 2025 (SCI-Expanded)

5. Internal force transfer in segmental RC structures

Research on Engineering Structures and Materials , cilt.1, ss.1-24, 2024 (Scopus, TRDizin)

6. The influence of tangential edge restraints on the nonlinear response of laminated composite cylindrical panels subject to a pinching force

Çağdaş İ. U.

Konya Mühendislik Bilimleri Dergisi , cilt.10, sa.3, ss.623-633, 2022 (Hakemli Dergi)

7. Structural behavior of MDF beams reinforced by unidirectional glass fiber reinforced thermoset polyurethane outer layers

ÇAĞDAŞ İ. U., Saeedi S.

Composite Structures , cilt.295, 2022 (SCI-Expanded)

8. A modified three rail shear test procedure for rigid foamed materials

TAŞKIN M., Sargin T., Aliyev R., ÇAĞDAŞ İ. U.

Journal of Cellular Plastics , cilt.58, sa.3, ss.515-539, 2022 (SCI-Expanded, Scopus)

9. A modified analytical expression to determine the quasi-static pre-indentation loads of metal-faced sandwich beams

ÇAĞDAŞ İ. U., TAŞKIN M.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS , cilt.22, sa.5, ss.1404-1425, 2020 (SCI-Expanded, Scopus)

10. The Influence of Axial Compression on the Free Vibration Frequencies of Cross-ply Laminated and Moderately Thick Cylinders

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.23, sa.1, ss.45-52, 2020 (ESCI)

11. Metal yüzlü sandviç konsol kirişlerde numune boyunun ölçülen temel titreşim frekansına etkisi

ÇAĞDAŞ İ. U., Aliyev R.

GAZİ ÜNİVERSİTESİ FEN BİLİMLERİ DERGİSİ PART: C TASARIM VE TEKNOLOJİ , cilt.1, ss.1-10, 2020 (TRDizin)

12. Basınç rijitliğinin hidrostatik basınç etkisi altındaki katmanlı kompozit silindirlerin burulmalı burkulmalarına etkisi

ÇAĞDAŞ İ. U., Yıldırım Ö.

Konya Mühendislik Bilimleri Dergisi , cilt.1, ss.1-10, 2020 (Hakemli Dergi)

13. Cam Elyaf Takviyeli Poliüretan Dış Yüzlü Sandviç Kirişlerin Eğilme Rijitliklerinin Konsol Kiriş Titreşim Deneyi İle Belirlenmesi

Gazi Üniversitesi Mühendislik Bilimleri Dergisi , cilt.5, sa.3, ss.273-279, 2019 (Hakemli Dergi)

14. Unimodal Optimization of Axially Compressed Shear Deformable Columns

International Journal of Computational and Experimental Science and Engineering , cilt.5, ss.100-104, 2019 (Hakemli Dergi)

15. Optimal design of variable stiffness laminated composite truncated cones under lateral external pressure

OCEAN ENGINEERING , cilt.145, ss.268-276, 2017 (SCI-Expanded, Scopus)

16. Optimal design of filament wound truncated cones under axial compression

COMPOSITE STRUCTURES , cilt.170, ss.250-260, 2017 (SCI-Expanded)

17. Effect of Fiber Orientation on Buckling and First-Ply Failures of Cylindrical Shear-Deformable Laminates

Cagdas I. U., ADALI S.

JOURNAL OF ENGINEERING MECHANICS , cilt.139, sa.8, ss.967-978, 2013 (SCI-Expanded, Scopus)

18. Buckling of cross-ply laminates subject to linearly varying compressive loads and in-plane boundary restraints

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS , cilt.26, sa.2, ss.193-215, 2013 (SCI-Expanded, Scopus)

19. Optimal shapes of clamped-simply supported columns under distributed axial load and stress constraint

ENGINEERING OPTIMIZATION , cilt.45, sa.2, ss.123-139, 2013 (SCI-Expanded, Scopus)

20. Design of a laminated composite variable curvature panel under uniaxial compression

Cagdas I., ADALI S.

ENGINEERING COMPUTATIONS , cilt.29, sa.1-2, ss.48-64, 2012 (SCI-Expanded, Scopus)

21. Effect of in-plane boundary restraints on optimal design of skew laminates under buckling loads

COMPOSITE STRUCTURES , cilt.93, sa.8, ss.2060-2069, 2011 (SCI-Expanded, Scopus)

22. Stability analysis of cross-ply laminated shells of revolution using a curved axisymmetric shell finite element

Cagdas I. U.

THIN-WALLED STRUCTURES , cilt.49, sa.6, ss.732-742, 2011 (SCI-Expanded)

23. Buckling of cross-ply cylinders under hydrostatic pressure considering pressure stiffness

OCEAN ENGINEERING , cilt.38, sa.4, ss.559-569, 2011 (SCI-Expanded, Scopus)

24. Failure analysis of curved composite panels based on first-ply and buckling failures

Procedia Engineering , cilt.10, ss.1591-1596, 2011 (Hakemli Dergi)

25. Assessment of the accuracy of homogenization in finite element analysis of grid plates under transverse loads

Cagdas I. U.

ENGINEERING COMPUTATIONS , cilt.27, sa.5-6, ss.676-693, 2010 (SCI-Expanded, Scopus)

26. Optimal design of simply supported columns subject to distributed axial load and stress constraint

OPTIMAL CONTROL APPLICATIONS & METHODS , cilt.30, sa.5, ss.505-520, 2009 (SCI-Expanded, Scopus)

27. Iterative algorithms for optimal design of columns subject to a stress constraint

ADALI S., Cagdas I. U.

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS , cilt.344, sa.5, ss.711-724, 2007 (SCI-Expanded)

28. Optimal sizing of piezo-actuators for minimum-deflection design of frames under uncertain loads

Adalı S., Sadek I. S., Bruch J. C., Sloss J. M., Cagdas I. U.

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS , cilt.344, sa.5, ss.698-710, 2007 (SCI-Expanded)

29. Optimization of clamped columns under distributed axial load and subject to stress constraints

Cagdas I. U., ADALI S.

ENGINEERING OPTIMIZATION , cilt.39, sa.4, ss.453-469, 2007 (SCI-Expanded)

30. Deflection control of elastically restrained laminated frames under deterministic and uncertain loads using induced strain actuators

ADALI S., Sadek I. S., Bruch J. C., Sloss J. M., Cagdas I. U.

COMPOSITE STRUCTURES , cilt.76, sa.1-2, ss.2-13, 2006 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 14

1. Optimal design of axially compressed sandwich composite cylinders having orthogrid core

Çağdaş İ. U.

ISARC 3rd International Scientific Research and Innovation Congress, İstanbul, Türkiye, 26 - 27 Ağustos 2022, ss.374-379, (Tam Metin Bildiri)

2. Linearized stability analysis of space frames using a degenerated beam finite element

Çağdaş İ. U.

ISARC 3rd International Scientific Research and Innovation Congress, 26 - 27 Ağustos 2022, ss.380-386, (Tam Metin Bildiri)

3. Failure analysis of curved composite panels based on first-ply and buckling failures

11th International Conference on the Mechanical Behavior of Materials (ICM11), Como Lake, İtalya, 5 - 09 Haziran 2011, ss.3-5, (Tam Metin Bildiri)

4. Failure analysis of curved composite panels based on first-ply and buckling failures

Adali S., Cagdas İ. U.

11th International Conference on the Mechanical Behavior of Materials (ICM), Como, İtalya, 01 Ocak 2011, cilt.10, ss.1591-1596, (Tam Metin Bildiri)

5. Semi-analytical finite element vibration analysis of cross-ply cylinders

ISTEC-2010 International Science & Technology Conference, Magusa, Kıbrıs (Kktc), 27 - 29 Ekim 2010, ss.3, (Tam Metin Bildiri)

6. Optimal design of a cylindrical composite panel under external pressure

9th International Congress on Advances in Civil Engineering, Trabzon, Türkiye, 27 - 30 Ağustos 2010, ss.3-5, (Tam Metin Bildiri)

7. Finite element solution for curved composite panels under a compressive load

AfriCOMP 2009, 1st African Conference on Computational Mechanics – An International Conference, Sun City, Güney Afrika, 7 - 11 Ocak 2009, ss.3-5, (Özet Bildiri)

8. Optimization of cylindrically curved composite panels under compressive loads

ICCM17, Edinburg, Birleşik Krallık, 1 - 03 Ocak 2009, ss.3-5, (Özet Bildiri)

9. Non-local elastic modelling of statics and dynamics of nano-sized beams in an elastic medium under distributed loads

Duvaut G., Lene F., ADALI S., ÇAĞDAŞ İ. U.

ICCST6, Durban, Güney Afrika, 1 - 03 Ocak 2007, ss.3-5, (Özet Bildiri)

10. Effect of boundary conditions on optimal composite rectangular plates under non-uniform buckling loads

ICCST6, Durban, Güney Afrika, 1 - 03 Ocak 2007, ss.3-5, (Özet Bildiri)

11. Optimization of columns under non-uniform axial loads

Fifth South African Conference on Computational and Applied Mechanics, SACAM06, Cape Town, Güney Afrika, 16 - 18 Ocak 2006, ss.3-5, (Tam Metin Bildiri)

12. ’Optimal design of elastically clamped columns subject to distributed axial load

6th World Congress on Structural and Multidisciplinary Optimization, Rio De Janeiro, Brezilya, 30 Mayıs - 03 Haziran 2005, ss.3-5, (Tam Metin Bildiri)

13. Iterative algorithms for optimal design of columns subject to a stress constraint