Evaluation of bitumen physical properties modified with waste plastic pipes


Creative Commons License

KÖFTECİ S., AHMEDZADE P., GÜNAY T.

CANADIAN JOURNAL OF CIVIL ENGINEERING, cilt.45, sa.6, ss.469-477, 2018 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 45 Sayı: 6
  • Basım Tarihi: 2018
  • Doi Numarası: 10.1139/cjce-2017-0672
  • Dergi Adı: CANADIAN JOURNAL OF CIVIL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.469-477
  • Anahtar Kelimeler: modified bitumen, ground plastic pipe, HDPE wastes, recycling, HIGH-DENSITY POLYETHYLENE, HOT MIX ASPHALT, TEMPERATURE, PERFORMANCE, FATIGUE, BINDER
  • Akdeniz Üniversitesi Adresli: Evet

Özet

The aim of this paper is to examine the effects of ground plastic pipe wastes on bitumen. For this purpose, three modified bitumen samples with modifier contents of 2%, 4%, and 6% along with pure bitumen were prepared and tested. To understand the effect of modifier on bitumen, conventional bitumen tests, rotational viscosity tests at 135 degrees C and 165 degrees C, dynamic shear rheometer tests at three different frequencies that represent three different traffic speeds, and bending beam rheometer (BBR) test were performed. The BBR test results showed that resistance of pure bitumen to low-temperature cracking increased by using additives up to 4%. Based on the results of this study, it can be said that waste plastic pipes can be used as modifier for the bitumen binder. The 4% additive showed the best performance.