Akademik Veri Yönetim Sistemi
Chemical Papers, 2025 (SCI-Expanded)
This study focuses on the synthesis of boron oxide nanofibers and their use as reinforcement materials in composites. Nanofiber synthesis was carried out by electrospinning method from solutions containing of boric acid (H3BO3), polyvinylpyrrolidone (PVP), and sodium dodecyl sulfate (SDS). Electrospun nanofibers were characterized by scanning electron microscopy (SEM) and thermogravimetric analysis (TGA) to find out the morphological structure, fiber diameter size, and chemical properties that change with temperature. Then they were calcined with different thermal programs. B2O3 formation in calcined nanofibers was proven by X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR). The diameter distribution of the calcined fibers was visualized by SEM, with an average fiber diameter size of 76.9 ± 3.7 nm. Calcined nanofibers were functionalization with [3 (Methacryloxy)propyl] trimethoxysilane for the composites productions. The matrix was prepared from bisphenol A-glycidyl methacrylate, triethylene glycol dimethacrylate and diurethanedimethacrylate monomers. Three-point bending tests were conducted to measure the flexural strength of B2O3 reinforced composites, and it was determined that 7% wt of B2O3 nanofiber reinforcement increased the flexural strength of the pure matrix by 123.2%. When the flexural strengths of B2O3 fibers and particles were compared, composites reinforced with B2O3 particles showed 42.2% less mechanical strength.