The Role of the Support of Mn-Na-W/Silica and Na-W/Silica
EuropaCat X 2011, Glasgow, United Kingdom, 28 August - 02 September 2011, pp.61, (Full Text)
- Publication Type: Conference Paper / Full Text
- City: Glasgow
- Country: United Kingdom
- Page Numbers: pp.61
- Akdeniz University Affiliated: Yes
Abstract
Introduction The reserves of natural are considered to be one of the most important future alternatives to the decreasing reserves of crude oil. Methane is the major component of natural gas [1]. For this reason, the direct methane conversion to the value-added products via the oxidative coupling of methane is of great interest for the chemical industry. However, up to date an industrial application has not been realized due to a lack of active and stable catalysts [2]. Mn/Na2WO4/SiO2 catalyst system is known in the literature to be an active and stable catalytic system [3]. However, many facts are still unknown, for example the role of the support material SiO2. Therefore, we studied a broad variety of support materials to elucidate its role. Experimental Na2WO4/Support and Mn/Na2WO4/Support catalysts were prepared, via an adapted incipient wetness impregnation method [4]. ZrO2, TiO2, Fe2O3, SiO2, Al2O3, MgO, CaO, La2O3 and SrO were applied as the support materials, with a relatively low surface area with respect to the SiO2 and Al2O3. The synthesized catalysts were characterized by BET surface area and X-ray diffraction analysis. The oxidative coupling of methane (OCM) was carried out in a packed-bed reactor, with respect to the stability of the catalyst. Results/Discussion Figure 1 shows the preliminary results for Na2WO4 and Mn/ Na2WO4 supported on SiO2 and Al2O3. It is evident, that the activation of CH4 takes place for both catalysts and both support materials. Moreover, Al2O3 as support material exhibits the highest CH4 conversions, however, with the main drawback of rather low C2-selectivities. The CH4 conversions of 2%Mn/5%Na2WO4/SiO2 and especially of 5%Na2WO4/SiO2, is low, which could also be a reason for their high selectivities.
The reason of the low C2 selectivity of the Al2O3-supported catalysts could be their substantially higher surface areas. Besides, when the XRD patterns of the catalysts have been taken into account, it seems that the cristobalite phase of the SiO2-supported catalysts might be needed for the good C2 selectivity. Figure 1. Catalytic activities of the Al2O3 and SiO2 supported catalysts (• 5%Na2WO4/Al2O3, • 5%Na2WO4/SiO2, • 2%Mn/5%Na2WO4/Al2O3, • 2%Mn/5%Na2WO4/SiO2, T: 750 oC, CH4:O2:N2 = 4:1:4, catalyst amount: 50 mg, gas flow: 60 ml/min). References. 1. E. Kondratenko and M. Baerns in “ Handbook of Heterogeneous Catalysis “, Wiley-VCH, Chapter 13.17.1, 3010 (2008). 2. J. H. Lunsford, Angew. Chem. Int. Engl., 34, 970 (1995). 3. S. Pak and J. H. Lunsford, Appl. Catal. Gen., 168, 131 (1998). 4. S. Pak, P. Qui and J. H. Lunsford, J. Cat., 179, 222 (1998).